Mike Tyson Tattoos

I voted for those 3 vector ones and mine and a few more lol.

tsk tsk, voting for yourself :bad:

I have got my canadian PR approval for me and my wife and have sent the passports to the Canadian Consulate in NYC for immigrant visa stamping. To get my PR card I have to land in Canada before Dec 19, 2007 when the visa expires.

I have not traveled outside the US after I got my H1B and am planning to go to Canada for stamping H1B for me H4 for my wife.

Would there be any problem for me to land in Canada since I will not be landing there with the intention to settle but will return after getting my H1B stamped in a couple of days.

Anyone gone through my kind of situation before. Please send me a PM.

I am concerend about being denied entry in Canada and then I will be nowhere because I cannot return to US without a vaid H1B stamp.

I think the answer is yes.

I'd like to join the conference call as well.

I have applied from Texas SC

My attorney mentioned it might 2 to 3 years to process an appeal, is that correct do you guys know any one who got it faster than that, he mentioned that we have to appeal to district court along with documentation of new resolution which was passed last year stating that employer has final discretion is deciding edu qualification for job role

The most important issue related to Retrogression is the 'per country of birth' quota. The problem of retrogression would be much less severe if this quota is abolished as it was done I believe in AC21. Can anyone confirm about this provision in AC21?
I have also noticed that in the immigration voice presentation though the problem of 'country quota' is very effectively highlighted, it is not included in the goals. Even the president's report mentions this quota as a problem. I would like to draw attention of the admin to this. Removal of this quota should be one of our primary goals. Of course recycling of lost numbers and not counting dependants against quota are important goals. Can admin include this in the goals slide? I am planning to take this presentation when I meet the local congressman who has so far responded to my correspondence very sympathetically.

Go for it! She can volunteer (obviously, she cannot get paid for the work she will do). I think it is a great idea to volunteer to establish connections and gain work experience to get ready for a real job.

My wife did the same thing when she was on H-4 and HR had no issues with that.

Cheers!

You can not work after 7/9/2007.
The end of the OPT will determine when you must stop working.
The 60 days grace period is only for you to take care of business before you go back home. In your case you must wait for 2 months and 24 days before returning to work otherwise you will be in violation of your status.

andy


THANKS

My primary tip is patience. When the wind is blowing, even slightly, if you're patient you will start to get in tune with the wind and be able to pick out the calm moments that always occur. You just have to be ready and then get off as many shots as possible during that calm moment. I shoot as many of my flower shots as I can very early or very late in the day. By very early, I mean at or just after sunrise. The wind is usually calm for a short while until the sun starts to heat the admosphere. I've had considerable success shooting in the very soft light at or after sunset, when the wind also calms. Long shutter speeds though. Unfortunately, too many blooms aren't open until the sun is higher in the sky and you have to resort to patience.

I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks in bundles for just a couple of dollars at your local nursery. Get the longer ones. I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem. This cuts down considerably on the movement. Don't know where Don learned the trick, but it works.

Some use a tool called a Plamp. See it here (http://www.naturephotographers.net/gs/gswimplamp.html) I've never used one, though have been tempted. The fear I have is that any clamping device will damage the plant. I shoot a lot in the gardens of several neighbors and at the Chicago Botanic Garden and make it a point to never leave any trace of my having been there. In other words, no footprints in the flower beds, no damaged plants, nothing. Don's trick works so well because it steadies the plant without causing any damage. It doesn't always work, but it does so often enough that it's worth hauling the sticks around.

I've also read several threads on other sites where people describe using "tents" to both diffuse the light and to stop the wind. I don't have any links for solid techniques, but will try to find some. It's tempting, though yet another piece of gear to carry.

These days I make heavy use of my 5-in-1 disk for diffusion and reflection. I have the 22-in. Photoflex Multidisc (http://www.bhphotovideo.com/bnh/controller/home?O=breadCrumb&A=search&Q=&ci=6196), which I like a lot. It's excellent for a lot of light control purposes and sometimes serves as a good wind block. There are cheaper ones, but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it.

When all else fails, I resort to flash to get the shot. I greatly dislike using flash and only use it when I want a shot and know that it's get it now or never. If I can come back and get the shot at a calmer time without flash, I will. I do use flash on occasion if I feel that the shot needs a little spark of light, but generally not. Flash is always used on a remote cord and diffused in some way, either with the wide-angle diffuser that's built into it, or by shooting through or bouncing it off of my multidisc.

As for shooting technique, a tripod is a must. I have two, but the one I use for flower shots allows me to splay the legs out and get the camera very low and/or allows me to reverse the column (I bought a short column to replace the one that came with the tripod) and hang the camera upside down. I use a ball head with a quick release. I also almost always use a remote release and frequently use mirror lock up. It's amazing how many images I've ruined because I moved the camera by pushing the shutter button or vibration from the mirror cause the slightest blur.

But above all, getting flower shots just requires a lot of patience. Hope all of this rambling helps.
Gary

hi friends,
even my PD is current. but my case is transferred from texas to vermont. though my PD is current my processing date is not current. what is the reason for transferring I- 485 case from one center to other.
any response is appreciated

Load balancing is one of the primary reasons.

For those that can see the Feb updates can you please post what date they are showing for:

I-129 ( H1-B Speciality Occupation Extension of stay)

Thanks

Long History
Mix of Visa Types
Labor Sub

These might have pulled the trigger for RFE


Received RFE for primary applicant (myself) and spouse.
Please submit evidence of lawful presence from October 1998 until August 17, 2007.
The documents may include the following:
A) a photo copy of form I-797 for all extensions and change of status
B) photo copy of form I-20 or IAP66 school records (front and back) including all school annotations
c) Photocopy (front and back) of applicant's Form I-94 Arrival/Departure Record

Below is my immigration timeline

CLASS ------ VALID FROM ------ VALID TO ------ Comments
H1-B -------- 5/16/1995 -------- 5/17/1998
H1-B -------- 5/17/1998 -------- 5/17/2001
H1-B -------- 12/23/1999 ------- 6/30/2001
H1-B -------- 7/1/2001 --------- 9/30/2001
0-1 --------- 10/3/2001 ------ 10/1/2004 ------ Stamped in Chennai
EAD --------- 8/4/2004 -------- 8/3/2005 ------- EB1 denied 1/15/2005
0-1 --------- 5/13/2005 ------- 5/12/2008 ------ Stamped in Chennai
0-1 --------- 4/3/2007 --------- 3/13/2010
0-1 ---------- 5/2/2207 --------- 5/12/2009

After 1/15/05 (EB-1 denial)
- Left the country on 6/15/05 (less than 6 months)
- During this time, applied for O-1 visa and got approved
- Got visa stamping in Chennai with O-1 visa
Do you see any issues with my response ?

Thanks. We are answering the 221g questions. Not clear about the format of the "invitation letter" from the sponsor/employer. Should this be in txt format and in the same document as the answers to the other questions? Or can this be a separate scanned pdf...

Anyone?

This thing is driving me crazy...

Do we need to send an invitation letter in a .txt format? How do I send an invitation letter with letterhead and signature in a .txt format?

Gurus, your inputs please: Can I take up a position in India with an American Firm while on H1B?
2 things:

1. Yes, you can be an expat, meaning you can still work elsewhere (any branch) in the world while your payroll is still run in US(using H1B for the same company in US) and taxes are paid in US.

2. Having a H1B does not restrict you to work only in US. You can work elsewhere in the world while your H1B is still valid unless the company revokes it for some reason.

Hope this helps.

*Note I am not an expert, I am just sharing the knowledge I have. :D

Thanks Chandu! Reasons to relocate are family and weather. At this point, I've a decent job in Chicago. Do you think this may be the right time to relocate to an Atlanta area given the economic climate....Also, how r the overall job prospects..

This may be a serious issue. Consult a lawyer. Receipting may take a while.
I sent in form G-325 for both me and my wife along with my I-485 instead of the G-325A as required on I-485 instructions by oversight. What do you guys recommend I do? Should I send in a new application or just send in the G-325A form with a letter stating the issue? Please help.

emailed the reporter to thank him of his support and give him more info on IV and their efforts and details on the IV agenda.

I also emailed moveon.org, and asked for their help

Hi myeb2gc ,

You added lot of hope in this H1 extn process but for how long did you got ur H1 extn ?

I was with Pyramid for less than a year. I had bad experince with them. Although I was enrolled as a fulltime employee I did not get any on bench pay. They are not good at finding you any new projects either. They are like any other desi consulting company just a little bigger.

She is not using her EAD, She is enrolled fulltime in school.

I have approved I140 notice ... i dont see A# can you pls help me find that number in approval notice (797)

It is in "Beneficiary" section, right above my name. But I heard some people do not have numbers on thier approved I-140. I do not know why, though.