power support makes by far the best dry install protectors out there. I too don't like wet install kits, and all other dry installs besides power support are less sturdy...often having tears in the protector before you even install it
more...The dark nail is a look thatSherifftruman
May 5, 01:56 PM
There also should be more members with a sense of humor in this forum.
I find the picture funny, though I have to admit it was way funnier 10 months ago when it was posted all over the net including Gizmodo and Engadget IIRC. ;)
The dark nail is a look thatHave been running Folding (GUI) on three Macs for the past few months:
PB G4 1.33GHz, 1GB RAM, 24x7
iMac G4 800, 1GB RAM, 24x7
iMac G4 700, 576MB RAM, 24x7
Combined, those have been averaging about 2,600 points per month for me.
Just added today (console):
a 3.6GHz Xeon, 1GB RAM, 800MHz system bus
a Dual 2.4GHz Xeon, 2GB RAM, 400Mhz system bus
How much of a jump in production should I see?
Kinetics Blackout nail polishrossagrant
Apr 20, 03:33 PM
Hi guys,
Pulling my hair out with this one as I'm one of those types that wants a fix and not a workaround.
A couple of days ago I put my Mac Pro to sleep before I got into bed as I usually do.
I was just drifting off to sleep and the thing decided to wake up on it's own. I put it back to sleep and I thought nothing of it until about 30 mins later it did it again.
Now I reset the PRAM, reset the SMC, trashed the powermanagement.plist and this didn't have an affect.
I then thought actually, why not do a fresh install of Snow Leopard as it's been running for sometime now and I had a lot of software installed I didn't use so I thought why not.
It's STILL doing the same thing.
Now the log says:
20/04/2011 15:40:21 kernel en0 Link down
20/04/2011 15:40:21 kernel en1 Link down
20/04/2011 15:40:22 kernel System Sleep
20/04/2011 15:40:22 kernel Wake reason = UHC6
20/04/2011 15:40:22 configd[13] network configuration changed.
20/04/2011 18:11:34 Spotify[568] Reachability Flag Status: -R tc----- networkStatusForFlags
20/04/2011 18:11:34 Spotify[568] Reachability Flag Status: -R tc----- networkStatusForFlags
20/04/2011 18:11:34 kernel System Wake
20/04/2011 18:11:34 kernel Previous Sleep Cause: 5
20/04/2011 18:11:34 kernel The USB device BRCM2046 Hub (Port 1 of Hub at 0x5a000000) may have caused a wake by issuing a remote wakeup (2)
20/04/2011 18:11:34 kernel The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0x5a100000) may have caused a wake by issuing a remote wakeup (3)
20/04/2011 18:11:34 kernel EIR is supported.
20/04/2011 18:11:34 kernel SSP is supported.
20/04/2011 18:11:37 kernel Ethernet [Intel82574L]: Link up on en1, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
20/04/2011 18:11:39 ntpd[42] bind() fd 25, family 30, port 123, scope 5, addr fe80::ea06:88ff:fecc:3b61, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
20/04/2011 18:11:39 ntpd[42] unable to create socket on en1 (13) for fe80::ea06:88ff:fecc:3b61#123
20/04/2011 18:11:40 kernel en0 Link down
So I am presuming it's a bluetooth device, which is either my magic mouse or my apple wireless keyboard causing the issue.
Could it be a dodgy bluetooth card though?
It hasn't had this problem ever before so I was also thinking it's maybe due to the recent 10.6.7 update which I read caused some trouble with bluetooth devices on some other macs.
It's just really bizarre.
I can turn off the 'allow bluetooth devices to wake this computer' and see if that helps but I have NEVER had to change this default setting before which would suggest some other conflict, a faulty mouse or keyboard or a faulty bluetooth card.
I don't want to just fix the symptom if the underlying problem is faulty hardware as I would rather have the offending article swapped out whilst I still have applecare.
Has anyone else experienced this lately???
Really appreciate you reading this so thanks!
Ross :)
Definitely simplify it, too many concepts competing for attention.
Try designing around one main concept, use fewer fonts and font sizes.
Do not clutter it up with all the leaves and doodads... it just makes it look too busy and therefore unappealing.
Simple simple simple, especially as you are just starting out. Clarify your most important concept, sketch it out with a pencil, rework it until it feels right. Also look on the net at ads that appeal to you, what did they do that works for you, how can you incorporate those layout/concept ideas into your own work to make it better? Take all that and your sketches work them together and then make it digital and come back to us, I'll bet dollars to donuts it'll be a lot nicer and more coherent and cohesive, just keep at it:).
BTW, the leaves make me think I can recycle my compost/tree leaves there as well, if this is for electronics, I think you can leave them out (no pun intended)
kevin2577
Mar 11, 12:42 AM
I am too. Not sure what time, probably after lunch maybe 1 or 2?
Is anyone running Lion on a lower-powered machine? I'd like to hear feedback on those who have tried it on an 11" MBA.
Glad to help!
Thanks. I sent you a PM. Having a few issues trying to get it to look as good as your version :)
princealfie
Mar 13, 09:50 AM
Won't upgrade without this error in iTunes and tinyumbrella won't start in TSS server. Any ideas on how to upgrade a JB iPad? Due to servers being down?
0 comments:
Post a Comment