Mike Tyson Tattoos

I bought my iMac in 2008 and I did not upgraded to Leopard or Snow Leopard. Lion will be released soon. Can I wait until Lion is released and then upgrade to Lion or will I be required to upgrade to Leopard prior to upgrading to Lion:confused?:?
If you bought it new in it came with Leopard (10.5). When Lion (10.7) is released, you can upgrade directly to it without first upgrading to Snow Leopard (10.6).

Here's info on what the freaky thing does:

http://www.macosxhints.com/article.php?story=20031010141631859

Thats actually really useful :)

Thanks!

If the stick physically fits, then it won't cause harm.

At best, it'll work great, running the stick out of spec.

At worst, the PC won't boot with the 'wrong' stick in there.

Most likely (all this is assuming a 'wrong' stick,) it will boot, but will boot slower than you want. For example, if it has an 866MHz processor, it might only boot at 650Mhz. (Because, for example, it uses a 133Mhz bus, and you put 100Mhz RAM in, so it would run the processor at only a 100MHz bus, dropping it's speed accordingly.)

Or, with lots of motherboards, the processor speed and RAM speed were independent, so it would run just fine, but the memory would run at the 'lowest common denominator' speed. This is especially true of newer DDR motherboards.
so basically, if the stick fits, and its faster than the memory the computer takes, it will clock down. I dont think that will be the case, the memory is older. I am just going to throw it in. I just dont want to ruin the computer, still need it for school.

Just a quick question... I downloaded the SMP Intel version for my MacBook Pro, but I can't figure out how to pause it! Last night I did a ctrl-c (quit) and it closed out... but this morning it started all over! What on earth is the "pause" command?

(yes I know I don't need to stop it for most things, but I like to at night and while I study because of the extra noise it creates.)

Basically you are freeing memory you did not malloc/calloc.

Actually there is a malloc, it's embedded in the memcpy.


void *pointerGivenByInstanceFunction = memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);


EDIT: Sorry ignore that. It's the "read out values bis" loop that's the problem.

Yes it's as robbieduncan says. In your one-line version, you're losing the pointer the copy of the double on the heap. Then later you try to pass the address of the copy on the stack to free, which rightly causes a crash.

Basically you can't do this in one line. You could, though, cast directly to a double pointer and still free it, like so:

double *pointerGivenByInstanceFunction = (double *)memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);
double returnElement = *pointerGivenByInstanceFunction;
NSLog(@"%g",returnElement);
free(pointerGivenByInstanceFunction);

Hey!

Anyone planning on going to the Apple store in Reston VA this thursday? I pre-ordered my phone and plan on swinging by before work at around ~6:30.

I know some Macrumors users live in the area because when I went to go play with an iPad, I punched in www.macrumors.com and it popped up in the history lol.

Can anyone point me to where the membership level numbers are spelled out. I've been trying to find the information but haven't had any luck. Thanks

I have a 250gb Porche design and it's nice. I hasn't failed. It hums a little, and it spools down when I unmount the drive from the OS. I really don't get what all the design kudos are for it. It has a shiny front, and is pretty much a rectangle. I like SilverKeeper, the backup software that comes with it. Careful with what you choose to exclude during the backup.

Glad to help!

Thanks. I sent you a PM. Having a few issues trying to get it to look as good as your version :)

I am not fluent in Perl but I do use Python at my work. I am mainly a C++ developer. I find Python easy to use and quite powerful for the things you listed. There are many 3rd party libraries that will help with most things you need to do. A SSH client called Paramiko was VERY helpful to me for logging into servers and transferring files and running commands. This site may help get you started with Python and Paramiko's SSH library.

http://jessenoller.com/2009/02/05/ssh-programming-with-paramiko-completely-different/

As for the file and string manipulations you listed, I find just doing a google search is helpful enough.

Just make sure you get a Python debugger if you go that way. I use Eclipse with Pydev. I am sure others may suggest a better debugger. It is adequate for my needs.

Hellhammer, just wanted to say thanks for creating the guide! It was very clear and easy for me to follow when I recently upgraded to Snow Leopard.

Nice idea, I'd like to see one!

If you do a little bit of searing, you can see some pretty cool videos by people using nothing but iPhones, especially the iphone4.

Has anyone here played with the iPhone 4 to do some videos?

I recently did a little short film using my iPhone 4. I attached my Canon 50mm f/1.4 lens to it (so I can do rack focusing) using a 35mm adapter onto an OWLE Bubo (http://www.wantowle.com/). Here was the results:

http://www.youtube.com/watch?v=yzsqFIHWDrM&hd=1

Would love to know what people think!

yes! the 30 pin memory from the SE/30 will work!! do you have any idea what size it is??

I will check out shipping probally tomorrow, as i have work to do tonight :)

The overlay is bugging me big time.

I've un installed and re-installed but the overlay (apogee speaker icon and headphone icon) is not there when pressing the mac volume keys on the keyboard.

Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)

Burberry. I feel like I model for them.
Lego :D
Sony. I love their tvs.
BMW/MINI
Ikea
Calvin Klein. Underwear and socks only
Victorias Secret. I'm a guy. :p
Lucky jeans
Apple
Hugo Boss

Nano Tubes, iPhone Buds and Purple iPod Sock SOLD to Kuebby!

You can consider: http://www.roadtools.com/

Can somebody please link to the keynote stream or the MacRumors page from this thread?

I've been avoiding sites all day and I didn't get an email.

No pink on the 23" I've been using for two months now.

Some residual ghosting with high contrast images that don't move, and a 2 inch band of slight discolouration down the left side. I do design and colour matters but for proofing I deal with a broadcast monitor for video or the printery for paper based.

I bought Applecare with my G5 and screen. Figure I'll test for six months and then return it if the problem becomes an obstacle to work.